Skip to content

FAQ

Marine Monitoring Methods FAQ

A measuring tape is laid out along the reef. Divers record what’s directly under specific points at fixed intervals (e.g. every 10 cm). It’s a manual, visual sampling method. Like checking what’s beneath each tick mark on a ruler. Data is written down underwater, point by point.

In short: PIT = record what’s under each point by eye, underwater.

A measuring tape is also laid out along the reef. Instead of recording points manually, divers take overlapping photos along the line. These images are later analyzed on a computer to assess coverage and species. It’s a visual capture method like scanning the reef with a camera for later analysis.

In short: UPT = record the whole transect with photos, then analyze later.

Divers take multiple photos of coral structures from different angles. Photos are processed using software to build a 3D model of the coral. This model shows shape, size, and changes over time. It’s like creating a digital twin of the coral to track its growth.

In short: 3D = capture coral from all sides, then build a model to monitor changes.

A measuring tape is laid out along the reef. In our case divers count all visible invertebrates (e.g. sea cucumbers, starfish) within a set belt width usually 1 or 2 meters. They record species and numbers while swimming slowly along the line. It’s a wide-area visual count like sweeping a corridor for invertebrates.

In short: Belt = count all invertebrates within a set zone along the tape.

Divers swim along a transect line and visually record all fish seen within a defined area. They note species, size, and numbers during the dive. It’s a live fish count. Like taking attendance in a moving classroom.

In short: UVC = spot and count fish by eye while swimming the transect.

A camera is placed on the seafloor with bait positioned in front. It records fish that come to investigate over a set time. Footage is reviewed later to identify species and behavior. It’s a passive method like setting a camera trap for marine life.

In short: BRUV = film fish attracted to bait, then analyze the video later.

Gili Air Essentials & Practical FAQ

Gili Air offers plenty of affordable weekly and monthly accommodation options. A cute private bungalow with AC and bathroom typically costs around €80 to €100 per week.

We recommend booking a homestay for your first 3 to 4 nights. Once you’re here, it’s easy to explore the island and find a place that feels right for you.

Once you’re among us, we’ll help you connect with trusted hosts and settle into a spot that suits your vibe and budget.

Local food is delicious, varied, and budget-friendly. You can expect to spend around €100 per week on meals that’s with generous portions and eating out daily.

This estimate doesn’t include alcohol, but covers plenty of nasi campur, fresh juices, and beachfront dinners.

The 60 days tourist visa (single entry) for Indonesia costs approximately €70 and you can get it online here.

Plan A:
Via Bali Fly into Bali, then take a 3-hour fast boat from Serangan Harbour. We recommend Blue Water Express, which offers hotel pickup and drop-off at Gili Air. Cost: IDR 900,000 Includes hotel pickup in Bali, we recommend staying in Sanur, as it’s conveniently located near the boat departure point.

Plan B:
Via Lombok: Fly into Lombok, then take a private car to North Lombok (IDR 450,000), followed by a private speedboat to Gili Air (IDR 350,000). Speedboats operate 24/7, and the ride takes about 15 minutes.

We can help arrange a smooth transfer for you.

Yes there are ATMs on the island, so you won’t be stranded without cash. Just check with your bank about international fees and let them know you’ll be using your card abroad to avoid any blocks.

For peace of mind, it’s always smart to carry a bit of cash when you arrive.

Yes but it can be patchy depending on where you stay. We have Wi-Fi at the base, and many guesthouses, cafés, and restaurants offer a decent connection.

For the most reliable access, grab a local SIM card at the airport after customs there are plenty of vendors, and it’s the easiest way to stay connected throughout your stay.

×
What is BRUV – Baited Remote Underwater Video method?

A camera is placed on the seafloor with bait positioned in front. It records fish that come to investigate over a set time. Footage is reviewed later to identify species and behavior. It’s a passive method like setting a camera trap for marine life.

In short: BRUV = film fish attracted to bait, then analyze the video later.

×
What is UVC – Underwater Visual Census method?

Divers swim along a transect line and visually record all fish seen within a defined area. They note species, size, and numbers during the dive. It’s a live fish count. Like taking attendance in a moving classroom.

In short: UVC = spot and count fish by eye while swimming the transect.

×
What is Belt Transect method?

A measuring tape is laid out along the reef. In our case divers count all visible invertebrates (e.g. sea cucumbers, starfish) within a set belt width usually 1 or 2 meters. They record species and numbers while swimming slowly along the line. It’s a wide-area visual count like sweeping a corridor for invertebrates.

In short: Belt = count all invertebrates within a set zone along the tape.

×
What is 3D Coral Monitoring method?

Divers take multiple photos of coral structures from different angles. Photos are processed using software to build a 3D model of the coral. This model shows shape, size, and changes over time. It’s like creating a digital twin of the coral to track its growth.

In short: 3D = capture coral from all sides, then build a model to monitor changes.

×
What is UPT – Underwater Photo Transect method?

A measuring tape is also laid out along the reef. Instead of recording points manually, divers take overlapping photos along the line. These images are later analyzed on a computer to assess coverage and species. It’s a visual capture method like scanning the reef with a camera for later analysis.

In short: UPT = record the whole transect with photos, then analyze later.

×
What is PIT – Point Intercept Transect method?

A measuring tape is laid out along the reef. Divers record what’s directly under specific points at fixed intervals (e.g. every 10 cm). It’s a manual, visual sampling method. Like checking what’s beneath each tick mark on a ruler. Data is written down underwater, point by point.

In short: PIT = record what’s under each point by eye, underwater.